Unpack PostgreSQL 7.4.7. If you have not downloaded the postgresql tarball to /var/tmp/postgresql-7.4.7.tar.gz, get it.

[root root]# cd /usr/local/src
[root src]# tar xzf /var/tmp/postgresql-7.4.7.tar.gz
[root src]# 
cd /usr/local/src
tar xzf /var/tmp/postgresql-7.4.7.tar.gz

ALTERNATIVE: Unpack PostgreSQL 7.4.7. If you have not downloaded the postgresql tarball to /var/tmp/postgresql-7.4.7.tar.bz2, get it.

[root root]# cd /usr/local/src
[root src]# tar xfj /var/tmp/postgresql-7.4.7.tar.bz2
[root src]# 
cd /usr/local/src
tar xfj /var/tmp/postgresql-7.4.7.tar.bz2

Install Bison. Only do this if bison --version is smaller than 1.875 and you install PostgreSQL 7.4 from cvs instead of tarball.

[root root]# cd /usr/local/src
[root src]# wget http://ftp.gnu.org/gnu/bison/bison-1.875.tar.gz
[root src]# tar xfz bison-1.875.tar.gz
[root src]# cd bison-1.875
[root src]# ./configure
[root src]# make install
      

Create the Postgres user.  Create a user and group (if you haven't done so before) for PostgreSQL. This is the account that PostgreSQL will run as since it will not run as root. Since nobody will log in directly as that user, we'll leave the password blank.

Debian users should probably use adduser instead of useradd. Type man adduser

[root src]# groupadd web
[root src]# useradd -g web -d /usr/local/pgsql postgres
[root src]# mkdir -p /usr/local/pgsql
[root src]# chown -R postgres.web /usr/local/pgsql /usr/local/src/postgresql-7.4.7
[root src]# chmod 750 /usr/local/pgsql
[root src]#
groupadd web
useradd -g web -d /usr/local/pgsql postgres
mkdir -p /usr/local/pgsql
chown -R postgres.web /usr/local/pgsql /usr/local/src/postgresql-7.4.7
chmod 750 /usr/local/pgsql

Set up postgres's environment variables. They are necessary for the executable to find its supporting libraries. Put the following lines into the postgres user's environment.

[root src]# su - postgres
[postgres ~] emacs ~postgres/.bashrc

Paste this line into .bash_profile:

source $HOME/.bashrc

Paste these lines into .bashrc:

export PATH=/usr/local/bin/:$PATH:/usr/local/pgsql/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/pgsql/lib

Test this by logging in as postgres and checking the paths; you should see /usr/local/pgsql/bin somewhere in the output (the total output is system-dependent so yours may vary)

[root src]# su - postgres
[postgres pgsql]$ env | grep PATH
LD_LIBRARY_PATH=:/usr/local/pgsql/lib
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin/X11:/usr/X11R6/bin:/root/bin:/usr/local/pgsql/bin:/usr/local/pgsql/bin
[postgres pgsql]$ exit

Don't continue unless you see correct output from env | grep PATH

Compile and install PostgreSQL.  Change to the postgres user and run ./configure to set the compilation options automatically. This is the point at which you can configure PostgreSQL in various ways. For example, if you are installing on "OS X" add the flags --with-includes=/sw/include/ --with-libraries=/sw/lib. If you want to see what the other possibilities are, run ./configure --help.

On debian woody (stable, 3.0), do ./configure --without-readline --without-zlib.

[root src]# su - postgres
[postgres pgsql]$ cd /usr/local/src/postgresql-7.4.7
[postgres postgresql-7.4.7]$ ./configure
creating cache ./config.cache
checking host system type... i686-pc-linux-gnu
(many lines omitted>
linking ./src/makefiles/Makefile.linux to src/Makefile.port
linking ./src/backend/port/tas/dummy.s to src/backend/port/tas.s
[postgres postgresql-7.4.7]$ make all
make -C doc all
make[1]: Entering directory `/usr/local/src/postgresql-7.4.7/doc'
(many lines omitted)
make[1]: Leaving directory `/usr/local/src/postgresql-7.4.7/src'
All of PostgreSQL successfully made. Ready to install.
[postgres postgresql-7.4.7]$ make install
make -C doc install
make[1]: Entering directory `/usr/local/src/postgresql-7.4.7/doc'
(many lines omitted)
Thank you for choosing PostgreSQL, the most advanced open source database
engine.
su - postgres
cd /usr/local/src/postgresql-7.4.7
./configure 
make all
make install

Start PostgreSQL.  The initdb command initializes the database. pg_ctl is used to start up PostgreSQL. If PostgreSQL is unable to allocate enough memory, see section 11 Tuning PostgreSQL (below).

[postgres postgresql-7.4.7]$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
The files belonging to this database system will be owned by user "postgres".
This user must also own the server process.
(17 lines omitted)
or
    /usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l logfile start
[postgres postgresql-7.4.7]$ /usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l /usr/local/pgsql/data/server.log start
postmaster successfully started
[postgres postgresql-7.4.7]$
/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
/usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l /usr/local/pgsql/data/server.log start

PostgreSQL errors will be logged in /usr/local/pgsql/data/server.log

Install Pl/pgSQL. Set up plpgsq and allow your user to have access. Plpgsql is a PL/SQL-like language. We add it to template1, which is the template from which all new databases are created. We can verify that it was created with the createlang command in list mode.

Additionals to install in Postgres 8.1.x

[postgres postgresql-7.4.7]$ createlang plpgsql template1
[postgres pgsql]$ createlang -l template1
Procedural languages
  Name   | Trusted?
---------+----------
 plpgsql | t
(1 row)

[postgres pgsql-7.4.7]$
createlang plpgsql template1
createlang -l template1

Test PostgreSQL (OPTIONAL). Create a database and try some simple commands. The output should be as shown.

[postgres pgsql]$ createdb mytestdb
CREATE DATABASE
[postgres pgsql]$ psql mytestdb
Welcome to psql, the PostgreSQL interactive terminal.

Type:  \copyright for distribution terms
       \h for help with SQL commands
       \? for help on internal slash commands
       \g or terminate with semicolon to execute query
       \q to quit

mytestdb=# select current_timestamp;
          timestamptz
-------------------------------
 2003-03-07 22:18:29.185413-08
(1 row)

mytestdb=# create function test1() returns integer as 'begin return 1; end;' language 'plpgsql';
CREATE
mytestdb=# select test1();
 test1
-------
     1
(1 row)

mytestdb=# \q
[postgres pgsql]$ dropdb mytestdb
DROP DATABASE
[postgres pgsql]$ exit
logout

[root src]#

Set PostgreSQL to start on boot. First, we copy the postgresql.txt init script, which automates startup and shutdown, to the distribution-specific init.d directory. Then we verify that it works. Then we automate it by setting up a bunch of symlinks that ensure that, when the operating system changes runlevels, postgresql goes to the appropriate state. Red Hat and Debian and SuSE each work a little differently. If you haven't untarred the OpenACS tarball, you will need to do so now to access the postgresql.txt file.

From now on, PostgreSQL should start automatically each time you boot up and it should shutdown gracefully each time you shut down. (Note: Debian defaults to starting all services on runlevels 2-5. Red Hat defaults to starting services on 3-5. So, on Red Hat, PostgreSQL won't start on runlevel 2 unless you alter the above commands a little. This usually isn't a problem as Red Hat defaults to runlevel 3)

Tune postgres. (OPTIONAL). The default values for PostgreSQL are very conservative; we can safely change some of them and improve performance.

FreeBSD users: See man syctl, man 5 sysctl and man 5 loader.conf.

Performance tuning resources: