Index: win/makefile.vc
===================================================================
diff -u
--- win/makefile.vc	(revision 0)
+++ win/makefile.vc	(revision c7abd01585e06664f9925485f2c1a5d6a2dbdabb)
@@ -0,0 +1,545 @@
+#------------------------------------------------------------- -*- makefile -*-
+# makefile.vc --
+#
+#	Microsoft Visual C++ makefile for use with nmake.exe v1.62+
+#	(VC++ 5.0+, MVSVC 11)
+#
+# This makefile is based upon the Tcl 8.6 Makefile.vc and modified to
+# make it suitable as an NSF package makefile.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001-2005 ActiveState Corporation.
+# Copyright (c) 2001-2004 David Gravereaux.
+# Copyright (c) 2003-2008 Pat Thoyts.
+# Copyright (c) 2013      Stefan Sobernig
+#------------------------------------------------------------------------------
+
+# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
+# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir)
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
+MSG = ^
+You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
+Platform SDK first to setup the environment.  Jump to this line to read^
+the build instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1)  It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the
+#     environment.  This is used as a check to see if vcvars32.bat had been
+#     run prior to running nmake or during the installation of Microsoft
+#     Visual C++, MSVCDir had been set globally and the PATH adjusted.
+#     Either way is valid.
+#
+#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+#     directory to setup the proper environment, if needed, for your
+#     current setup.  This is a needed bootstrap requirement and allows the
+#     swapping of different environments to be easier.
+#
+# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
+#     vcvars32.bat according to the instructions for it.  This can also
+#     turn on the 64-bit compiler, if your SDK has it.
+#
+# 3)  Targets are:
+#	all       -- Builds everything.
+#	<project> -- Builds the project (eg: nmake sample)
+#	test      -- Builds and runs the test suite.
+#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
+#		     in an appropriate subdirectory.
+#	clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4)  Macros usable on the commandline:
+#	INSTALLDIR=<path>
+#		Sets where to install Tcl from the built binaries.
+#		C:\Progra~1\Tcl is assumed when not specified.
+#
+#	OPTS=loimpact,msvcrt,nothreads,pdbs,profile,static,symbols,unchecked,none
+#		Sets special options for the core.  The default is for none.
+#		Any combination of the above may be used (comma separated).
+#		'none' will over-ride everything to nothing.
+#
+#		loimpact = Adds a flag for how NT treats the heap to keep memory
+#			   in use, low.  This is said to impact alloc performance.
+#		msvcrt   = Affects the static option only to switch it from
+#			   using libcmt(d) as the C runtime [by default] to
+#			   msvcrt(d). This is useful for static embedding
+#			   support.
+#		nothreads = Turns off multithreading support (not recommended)
+#		static  =  Builds a static library of the core instead of a
+#			   dll.  The shell will be static (and large), as well.
+#		pdbs     = Build detached symbols for release builds.
+#		profile  = Adds profiling hooks.  Map file is assumed.
+#		symbols  = Debug build. Links to the debug C runtime, disables
+#			   optimizations and creates pdb symbols files.
+#		unchecked= Allows a symbols build to not use the debug
+#			   enabled runtime (msvcrt.dll not msvcrtd.dll
+#			   or libcmt.lib not libcmtd.lib).
+#
+#	STATS=compdbg,memdbg,none
+#		Sets optional memory and bytecode compiler debugging code added
+#		to the core.  The default is for none.  Any combination of the
+#		above may be used (comma separated).  'none' will over-ride
+#		everything to nothing.
+#
+#		compdbg  = Enables byte compilation logging.
+#		memdbg   = Enables the debugging memory allocator.
+#
+#	CHECKS=64bit,fullwarn,nodep,none
+#		Sets special macros for checking compatability.
+#
+#		64bit    = Enable 64bit portability warnings (if available)
+#		fullwarn = Builds with full compiler and link warnings enabled.
+#			    Very verbose.
+#		nodep	 = Turns off compatability macros to ensure the extension
+#			    isn't being built with deprecated functions.
+#
+#	MACHINE=(ALPHA|AMD64|IA64|IX86)
+#		Set the machine type used for the compiler, linker, and
+#		resource compiler.  This hook is needed to tell the tools
+#		when alternate platforms are requested.  IX86 is the default
+#		when not specified. If the CPU environment variable has been
+#		set (ie: recent Platform SDK) then MACHINE is set from CPU.
+#
+#	TMP_DIR=<path>
+#	OUT_DIR=<path>
+#		Hooks to allow the intermediate and output directories to be
+#		changed.  $(OUT_DIR) is assumed to be
+#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
+#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+#	TESTPAT=<file>
+#		Reads the tests requested to be run from this file.
+#
+# 5)  Examples:
+#
+#	Basic syntax of calling nmake looks like this:
+#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# 	Using VC++:
+#
+#                        Standard (in cmd.exe, no frills, x86)
+#       c:\nsf_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\nsf_src\win\>nmake -f makefile.vc TCLDIR=c:\tcl_src\
+#       c:\nsf_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+#                         Building for Win64 (IA64)
+#       c:\nsf_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\nsf_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+#       Targeting Windows pre64 RETAIL
+#       c:\nsf_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#	Using Microsoft Visual Compiler 11+:
+#	see also http://msdn.microsoft.com/en-us/library/vstudio/x4d2c09s.aspx
+#
+#			Standard (in cmd.exe, no frills, x86)
+#	c:\nsf_src\win>"c:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\vcvarsall.bat" x86
+#       c:\nsf_src\win\>nmake -f makefile.vc all TCLDIR=c:\tcl_src\ MACHINE=X86
+#       c:\nsf_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+#                         Building for Win64 (AMD64)
+#	c:\nsf_src\win>"c:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\vcvarsall.bat" amd64
+#       c:\nsf_src\win\>nmake -f makefile.vc all TCLDIR=c:\tcl_src\ MACHINE=AMD64
+#       c:\nsf_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is  going to build sample05.dll and
+# would install it into $(INSTALLDIR)\lib\sample05
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = nsf
+
+# Uncomment the following line if this is a Tk extension.
+#PROJECT_REQUIRES_TK=1
+!include "rules.vc"
+
+!include "pkg.vc"
+
+DOTVERSION      = $(PACKAGE_VERSION:"=) #"
+VERSION         = $(PACKAGE_MAJOR)$(PACKAGE_MINOR)
+STUBPREFIX      = $(PROJECT)stub
+
+PRJ_CFLAGS	= -DNSF_VERSION=\"$(DOTVERSION)\" -DNSF_PATCHLEVEL=\"$(PACKAGE_VERSION)\"
+
+DLLOBJS = \
+	$(TMP_DIR)\nsf.obj \
+	$(TMP_DIR)\nsfError.obj \
+	$(TMP_DIR)\nsfObjectData.obj \
+	$(TMP_DIR)\nsfProfile.obj \
+	$(TMP_DIR)\nsfDebug.obj \
+	$(TMP_DIR)\nsfUtil.obj \
+	$(TMP_DIR)\nsfObj.obj \
+	$(TMP_DIR)\nsfPointer.obj \
+	$(TMP_DIR)\nsfShadow.obj \
+	$(TMP_DIR)\nsfCompile.obj \
+	$(TMP_DIR)\aolstub.obj \
+	$(TMP_DIR)\nsfStubInit.obj
+
+PRJTESTS = \
+	$(ROOT)\tests\object-system.test \
+	$(ROOT)\tests\alias.test \
+	$(ROOT)\tests\introspection.test \
+	$(ROOT)\tests\returns.test \
+	$(ROOT)\tests\cget.test \
+	$(ROOT)\tests\method-parameter.test \
+	$(ROOT)\tests\serialize.test \
+	$(ROOT)\tests\contains.test \
+	$(ROOT)\tests\method-require.test \
+	$(ROOT)\tests\submethods.test \
+	$(ROOT)\tests\destroy.test \
+	$(ROOT)\tests\methods.test \
+	$(ROOT)\tests\disposition.test \
+	$(ROOT)\tests\mixinof.test \
+	$(ROOT)\tests\tcl86.test \
+	$(ROOT)\tests\doc.test \
+	$(ROOT)\tests\tcloo.test \
+	$(ROOT)\tests\forward.test \
+	$(ROOT)\tests\var-access.test \
+	$(ROOT)\tests\info-method.test \
+	$(ROOT)\tests\varresolution.test \
+	$(ROOT)\tests\interceptor-slot.test\
+	$(ROOT)\tests\properties.test \
+	$(ROOT)\tests\volatile.test \
+	$(ROOT)\tests\interp.test \
+	$(ROOT)\tests\protected.test \
+	$(ROOT)\tests\parameters.test
+
+PRJHEADERS =
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT		= .
+ROOT            = ..
+
+PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR	= $(ROOT)\generic
+WINDIR		= $(ROOT)\win
+LIBDIR          = $(ROOT)\library
+DOCDIR		= $(ROOT)\doc
+TOOLSDIR	= $(ROOT)\tools
+COMPATDIR	= $(ROOT)\compat
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug	= $(OPTIMIZATIONS)
+!else
+cdebug	=
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug	= -Zi -Od $(DEBUGFLAGS)
+!else
+cdebug	= -Zi -WX $(DEBUGFLAGS)
+!endif
+
+### Declarations common to all compiler options
+cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
+cflags = -nologo -c $(COMPILERFLAGS) -DBUILD_$(PROJECT) $(cwarn) -Fp$(TMP_DIR)^\
+
+!if $(MSVCRT)
+!if $(DEBUG) && !$(UNCHECKED)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG) && !$(UNCHECKED)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+cflags = $(cflags) -DMODULE_SCOPE=extern
+
+!if !$(STATIC_BUILD)
+cflags = $(cflags) -DUSE_TCL_STUBS
+!if defined(TKSTUBLIB)
+cflags = $(cflags) -DUSE_TK_STUBS
+!endif
+!endif
+
+INCLUDES	= $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)"
+BASE_CFLAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES)
+CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE
+TCL_CFLAGS	= -DPACKAGE_NAME="\"$(PROJECT)\"" \
+		  -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
+		  -DBUILD_$(PROJECT) \
+		  $(BASE_CFLAGS) $(OPTDEFINES) $(PRJ_CFLAGS)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug	= -debug -debugtype:cv
+!if $(MSVCRT)
+ldebug = $(ldebug) -nodefaultlib:msvcrt
+!endif
+!else
+ldebug	= -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags	= -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)
+
+!if $(PROFILE)
+lflags	= $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags	= $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags	= $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags	= $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+!if !$(STATIC_BUILD)
+baselibs  = $(TCLSTUBLIB)
+!if defined(TKSTUBLIB)
+baselibs  = $(baselibs) $(TKSTUBLIB)
+!endif
+!endif
+
+# Avoid 'unresolved external symbol __security_cookie' errors.
+# c.f. http://support.microsoft.com/?id=894573
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
+baselibs   = $(baselibs) bufferoverflowU.lib
+!endif
+!endif
+
+baselibs   = $(baselibs) user32.lib gdi32.lib
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!if "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!endif
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all:	    setup $(PROJECT)
+$(PROJECT): setup pkgIndex $(PRJLIB)
+install:    install-binaries install-libraries install-docs
+pkgIndex:   $(OUT_DIR)\pkgIndex.tcl
+
+test: setup $(PROJECT)
+	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
+	@set TCLLIBPATH=$(OUT_DIR_PATH:\=/)
+!if $(TCLINSTALL)
+	@set PATH=$(_TCLDIR)\bin;$(PATH)
+!else
+	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
+!endif
+	@echo lappend auto_path $(ROOT); set argv [lassign $$argv __src]; source $$__src; > nsftest.tcl
+
+!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
+	for %i in ($(PRJTESTS)) do \
+		$(DEBUGGER) $(TCLSH) nsftest.tcl %i -testlog __test.log
+!else 
+        @echo Please wait while the tests are collected... 
+	for %i in ($(PRJTESTS)) do \
+		$(DEBUGGER) $(TCLSH) nsftest.tcl %i -testlog __test.log >> tests.log 
+	type tests.log | more
+!endif
+	@$(TCLSH) "$(ROOT)/tests/summary.tcl" -testlog __test.log 
+	@del nsftest.tcl
+#@del __test.log
+
+shell: setup $(PROJECT)
+	@set VLERQ_LIBRARY=$(LIBDIR:\=/)
+	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
+	@set TCLLIBPATH=$(OUT_DIR_PATH:\=/)
+!if $(TCLINSTALL)
+	@set PATH=$(_TCLDIR)\bin;$(PATH)
+!else
+	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
+!endif
+	$(DEBUGGER) $(TCLSH) $(SCRIPT)
+
+setup:
+	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+# See <tcl>/win/coffbase.txt for extension base addresses.
+$(PRJLIB): $(DLLOBJS)
+!if $(STATIC_BUILD)
+	$(lib32) -nologo -out:$@ @<<
+$**
+<<
+!else
+	$(link32) $(dlllflags) -base:@$(COFFBASE),thread -out:$@ $(baselibs) @<<
+$**
+<<
+	$(_VC_MANIFEST_EMBED_DLL)
+	-@del $*.exp
+!endif
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+		-DCOMMAVERSION=$(DOTVERSION:.=,),0 \
+		-DDOTVERSION=\"$(DOTVERSION)\" \
+		-DVERSION=\"$(VERSION)$(SUFX)\" \
+!if $(DEBUG)
+	-d DEBUG \
+!endif
+!if $(TCL_THREADS)
+	-d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+	-d STATIC_BUILD \
+!endif
+	$<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#-------------------------------------------------------------------------
+# Explicit dependency rules
+#
+#-------------------------------------------------------------------------
+
+$(OUT_DIR)\pkgIndex.tcl:
+	@echo package ifneeded $(PROJECT) $(DOTVERSION) \
+	    [list load [file join $$dir $(PRJLIBNAME)] $(PROJECT)] > $@
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+	@echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+	@$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)"
+
+install-libraries:
+	@echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+	@echo Installing NX
+	@if not exist "$(SCRIPT_INSTALL_DIR)"\nx mkdir "$(SCRIPT_INSTALL_DIR)"\nx 
+	@$(CPY) $(LIBDIR)\nx\*.tcl "$(SCRIPT_INSTALL_DIR)"\nx
+	@echo Installing serialize
+	@if not exist "$(SCRIPT_INSTALL_DIR)\serialize" mkdir "$(SCRIPT_INSTALL_DIR)\serialize" 
+	@$(CPY) $(LIBDIR)\serialize\*.tcl "$(SCRIPT_INSTALL_DIR)\serialize"
+	@echo Installing XOTcl2
+	@if not exist "$(SCRIPT_INSTALL_DIR)\xotcl" mkdir "$(SCRIPT_INSTALL_DIR)\xotcl" 
+	@$(CPY) $(LIBDIR)\xotcl\apps "$(SCRIPT_INSTALL_DIR)\xotcl\apps" /e
+	@$(CPY) $(LIBDIR)\xotcl\library "$(SCRIPT_INSTALL_DIR)\xotcl\library" /e
+	@$(CPY) $(LIBDIR)\xotcl\xo* "$(SCRIPT_INSTALL_DIR)\xotcl"
+	@echo Installing NX libs
+	@if not exist "$(SCRIPT_INSTALL_DIR)\lib" mkdir "$(SCRIPT_INSTALL_DIR)\lib" 
+	@$(CPY) $(LIBDIR)\lib\*.tcl "$(SCRIPT_INSTALL_DIR)\lib"
+
+	@type "$(LIBDIR)\pkgIndex.tcl" >> "$(SCRIPT_INSTALL_DIR)"\pkgIndex.tcl
+install-docs:
+	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+# @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+	@if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc
+	@if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
+	@if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
+	@if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
+
+realclean: clean
+	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
Index: win/nmakehlp.c
===================================================================
diff -u
--- win/nmakehlp.c	(revision 0)
+++ win/nmakehlp.c	(revision c7abd01585e06664f9925485f2c1a5d6a2dbdabb)
@@ -0,0 +1,697 @@
+/*
+ * ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ *	This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2006 by Pat Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ * ----------------------------------------------------------------------------
+ */
+
+#define _CRT_SECURE_NO_DEPRECATE
+#include <windows.h>
+#define NO_SHLWAPI_GDI
+#define NO_SHLWAPI_STREAM
+#define NO_SHLWAPI_REG
+#include <shlwapi.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+#pragma comment (lib, "shlwapi.lib")
+#include <stdio.h>
+#include <math.h>
+
+/*
+ * This library is required for x64 builds with _some_ versions of MSVC
+ */
+#if defined(_M_IA64) || defined(_M_AMD64)
+#if _MSC_VER >= 1400 && _MSC_VER < 1500
+#pragma comment(lib, "bufferoverflowU")
+#endif
+#endif
+
+/* ISO hack for dumb VC++ */
+#ifdef _MSC_VER
+#define   snprintf	_snprintf
+#endif
+
+
+
+/* protos */
+
+static int CheckForCompilerFeature(const char *option);
+static int CheckForLinkerFeature(const char *option);
+static int IsIn(const char *string, const char *substring);
+static int SubstituteFile(const char *substs, const char *filename);
+static int QualifyPath(const char *path);
+static const char *GetVersionFromFile(const char *filename, const char *match, int numdots);
+static DWORD WINAPI ReadFromPipe(LPVOID args);
+
+/* globals */
+
+#define CHUNK	25
+#define STATICBUFFERSIZE    1000
+typedef struct {
+    HANDLE pipe;
+    char buffer[STATICBUFFERSIZE];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+
+/*
+ * exitcodes: 0 == no, 1 == yes, 2 == error
+ */
+
+int
+main(
+    int argc,
+    char *argv[])
+{
+    char msg[300];
+    DWORD dwWritten;
+    int chars;
+
+    /*
+     * Make sure children (cl.exe and link.exe) are kept quiet.
+     */
+
+    SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+    /*
+     * Make sure the compiler and linker aren't effected by the outside world.
+     */
+
+    SetEnvironmentVariable("CL", "");
+    SetEnvironmentVariable("LINK", "");
+
+    if (argc > 1 && *argv[1] == '-') {
+	switch (*(argv[1]+1)) {
+	case 'c':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		        "usage: %s -c <compiler option>\n"
+			"Tests for whether cl.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForCompilerFeature(argv[2]);
+	case 'l':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+	       		"usage: %s -l <linker option>\n"
+			"Tests for whether link.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForLinkerFeature(argv[2]);
+	case 'f':
+	    if (argc == 2) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+			"usage: %s -f <string> <substring>\n"
+			"Find a substring within another\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    } else if (argc == 3) {
+		/*
+		 * If the string is blank, there is no match.
+		 */
+
+		return 0;
+	    } else {
+		return IsIn(argv[2], argv[3]);
+	    }
+	case 's':
+	    if (argc == 2) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+			"usage: %s -s <substitutions file> <file>\n"
+			"Perform a set of string map type substutitions on a file\n"
+			"exitcodes: 0\n",
+			argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+			&dwWritten, NULL);
+		return 2;
+	    }
+	    return SubstituteFile(argv[2], argv[3]);
+	case 'V':
+	    if (argc != 4) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		    "usage: %s -V filename matchstring\n"
+		    "Extract a version from a file:\n"
+		    "eg: pkgIndex.tcl \"package ifneeded http\"",
+		    argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+		    &dwWritten, NULL);
+		return 0;
+	    }
+	    printf("%s\n", GetVersionFromFile(argv[2], argv[3], *(argv[1]+2) - '0'));
+	    return 0;
+	case 'Q':
+	    if (argc != 3) {
+		chars = snprintf(msg, sizeof(msg) - 1,
+		    "usage: %s -Q path\n"
+		    "Emit the fully qualified path\n"
+		    "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+		    &dwWritten, NULL);
+		return 2;
+	    }
+	    return QualifyPath(argv[2]);
+	}
+    }
+    chars = snprintf(msg, sizeof(msg) - 1,
+	    "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
+	    "This is a little helper app to equalize shell differences between WinNT and\n"
+	    "Win9x and get nmake.exe to accomplish its job.\n",
+	    argv[0]);
+    WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+    return 2;
+}
+
+static int
+CheckForCompilerFeature(
+    const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = FALSE;
+
+    /*
+     * Create a non-inheritible pipe.
+     */
+
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /*
+     * Dupe the write side, make it inheritible, and close the original.
+     */
+
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Same as above, but for the error side.
+     */
+
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Base command line.
+     */
+
+    lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
+
+    /*
+     * Append our option for testing
+     */
+
+    lstrcat(cmdline, option);
+
+    /*
+     * Filename to compile, which exists, but is nothing and empty.
+     */
+
+    lstrcat(cmdline, " .\\nul");
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = snprintf(msg, sizeof(msg) - 1,
+		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+	return 2;
+    }
+
+    /*
+     * Close our references to the write handles that have now been inherited.
+     */
+
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /*
+     * Start the pipe reader threads.
+     */
+
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /*
+     * Block waiting for the process to end.
+     */
+
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /*
+     * Wait for our pipe to get done reading, should it be a little slow.
+     */
+
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /*
+     * Look for the commandline warning code in both streams.
+     *  - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
+     */
+
+    return !(strstr(Out.buffer, "D4002") != NULL
+             || strstr(Err.buffer, "D4002") != NULL
+             || strstr(Out.buffer, "D9002") != NULL
+             || strstr(Err.buffer, "D9002") != NULL
+             || strstr(Out.buffer, "D2021") != NULL
+             || strstr(Err.buffer, "D2021") != NULL);
+}
+
+static int
+CheckForLinkerFeature(
+    const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = TRUE;
+
+    /*
+     * Create a non-inheritible pipe.
+     */
+
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /*
+     * Dupe the write side, make it inheritible, and close the original.
+     */
+
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Same as above, but for the error side.
+     */
+
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /*
+     * Base command line.
+     */
+
+    lstrcpy(cmdline, "link.exe -nologo ");
+
+    /*
+     * Append our option for testing.
+     */
+
+    lstrcat(cmdline, option);
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = snprintf(msg, sizeof(msg) - 1,
+		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+	return 2;
+    }
+
+    /*
+     * Close our references to the write handles that have now been inherited.
+     */
+
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /*
+     * Start the pipe reader threads.
+     */
+
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /*
+     * Block waiting for the process to end.
+     */
+
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /*
+     * Wait for our pipe to get done reading, should it be a little slow.
+     */
+
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /*
+     * Look for the commandline warning code in the stderr stream.
+     */
+
+    return !(strstr(Out.buffer, "LNK1117") != NULL ||
+	    strstr(Err.buffer, "LNK1117") != NULL ||
+	    strstr(Out.buffer, "LNK4044") != NULL ||
+	    strstr(Err.buffer, "LNK4044") != NULL);
+}
+
+static DWORD WINAPI
+ReadFromPipe(
+    LPVOID args)
+{
+    pipeinfo *pi = (pipeinfo *) args;
+    char *lastBuf = pi->buffer;
+    DWORD dwRead;
+    BOOL ok;
+
+  again:
+    if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
+	CloseHandle(pi->pipe);
+	return (DWORD)-1;
+    }
+    ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
+    if (!ok || dwRead == 0) {
+	CloseHandle(pi->pipe);
+	return 0;
+    }
+    lastBuf += dwRead;
+    goto again;
+
+    return 0;  /* makes the compiler happy */
+}
+
+static int
+IsIn(
+    const char *string,
+    const char *substring)
+{
+    return (strstr(string, substring) != NULL);
+}
+
+/*
+ * GetVersionFromFile --
+ * 	Looks for a match string in a file and then returns the version
+ * 	following the match where a version is anything acceptable to
+ * 	package provide or package ifneeded.
+ */
+
+static const char *
+GetVersionFromFile(
+    const char *filename,
+    const char *match,
+    int numdots)
+{
+    size_t cbBuffer = 100;
+    static char szBuffer[100];
+    char *szResult = NULL;
+    FILE *fp = fopen(filename, "rt");
+
+    if (fp != NULL) {
+	/*
+	 * Read data until we see our match string.
+	 */
+
+	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+	    LPSTR p, q;
+
+	    p = strstr(szBuffer, match);
+	    if (p != NULL) {
+		/*
+		 * Skip to first digit after the match.
+		 */
+
+		p += strlen(match);
+		while (*p && !isdigit(*p)) {
+		    ++p;
+		}
+
+		/*
+		 * Find ending whitespace.
+		 */
+
+		q = p;
+		while (*q && (strchr("0123456789.ab", *q)) && ((!strchr(".ab", *q)
+			    && (!strchr("ab", q[-1])) || --numdots))) {
+		    ++q;
+		}
+
+		memcpy(szBuffer, p, q - p);
+		szBuffer[q-p] = 0;
+		szResult = szBuffer;
+		break;
+	    }
+	}
+	fclose(fp);
+    }
+    return szResult;
+}
+
+/*
+ * List helpers for the SubstituteFile function
+ */
+
+typedef struct list_item_t {
+    struct list_item_t *nextPtr;
+    char * key;
+    char * value;
+} list_item_t;
+
+/* insert a list item into the list (list may be null) */
+static list_item_t *
+list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
+{
+    list_item_t *itemPtr = malloc(sizeof(list_item_t));
+    if (itemPtr) {
+	itemPtr->key = strdup(key);
+	itemPtr->value = strdup(value);
+	itemPtr->nextPtr = NULL;
+
+	while(*listPtrPtr) {
+	    listPtrPtr = &(*listPtrPtr)->nextPtr;
+	}
+	*listPtrPtr = itemPtr;
+    }
+    return itemPtr;
+}
+
+static void
+list_free(list_item_t **listPtrPtr)
+{
+    list_item_t *tmpPtr, *listPtr = *listPtrPtr;
+    while (listPtr) {
+	tmpPtr = listPtr;
+	listPtr = listPtr->nextPtr;
+	free(tmpPtr->key);
+	free(tmpPtr->value);
+	free(tmpPtr);
+    }
+}
+
+/*
+ * SubstituteFile --
+ *	As windows doesn't provide anything useful like sed and it's unreliable
+ *	to use the tclsh you are building against (consider x-platform builds -
+ *	eg compiling AMD64 target from IX86) we provide a simple substitution
+ *	option here to handle autoconf style substitutions.
+ *	The substitution file is whitespace and line delimited. The file should
+ *	consist of lines matching the regular expression:
+ *	  \s*\S+\s+\S*$
+ *
+ *	Usage is something like:
+ *	  nmakehlp -S << $** > $@
+ *        @PACKAGE_NAME@ $(PACKAGE_NAME)
+ *        @PACKAGE_VERSION@ $(PACKAGE_VERSION)
+ *        <<
+ */
+
+static int
+SubstituteFile(
+    const char *substitutions,
+    const char *filename)
+{
+    size_t cbBuffer = 1024;
+    static char szBuffer[1024], szCopy[1024];
+    char *szResult = NULL;
+    list_item_t *substPtr = NULL;
+    FILE *fp, *sp;
+
+    fp = fopen(filename, "rt");
+    if (fp != NULL) {
+
+	/*
+	 * Build a list of substutitions from the first filename
+	 */
+
+	sp = fopen(substitutions, "rt");
+	if (sp != NULL) {
+	    while (fgets(szBuffer, cbBuffer, sp) != NULL) {
+		char *ks, *ke, *vs, *ve;
+		ks = szBuffer;
+		while (ks && *ks && isspace(*ks)) ++ks;
+		ke = ks;
+		while (ke && *ke && !isspace(*ke)) ++ke;
+		vs = ke;
+		while (vs && *vs && isspace(*vs)) ++vs;
+		ve = vs;
+		while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
+		*ke = 0, *ve = 0;
+		list_insert(&substPtr, ks, vs);
+	    }
+	    fclose(sp);
+	}
+
+	/* debug: dump the list */
+#ifdef _DEBUG
+	{
+	    int n = 0;
+	    list_item_t *p = NULL;
+	    for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
+		fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
+	    }
+	}
+#endif
+
+	/*
+	 * Run the substitutions over each line of the input
+	 */
+
+	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+	    list_item_t *p = NULL;
+	    for (p = substPtr; p != NULL; p = p->nextPtr) {
+		char *m = strstr(szBuffer, p->key);
+		if (m) {
+		    char *cp, *op, *sp;
+		    cp = szCopy;
+		    op = szBuffer;
+		    while (op != m) *cp++ = *op++;
+		    sp = p->value;
+		    while (sp && *sp) *cp++ = *sp++;
+		    op += strlen(p->key);
+		    while (*op) *cp++ = *op++;
+		    *cp = 0;
+		    memcpy(szBuffer, szCopy, sizeof(szCopy));
+		}
+	    }
+	    printf(szBuffer);
+	}
+
+	list_free(&substPtr);
+    }
+    fclose(fp);
+    return 0;
+}
+
+/*
+ * QualifyPath --
+ *
+ *	This composes the current working directory with a provided path
+ *	and returns the fully qualified and normalized path.
+ *	Mostly needed to setup paths for testing.
+ */
+
+static int
+QualifyPath(
+    const char *szPath)
+{
+    char szCwd[MAX_PATH + 1];
+    char szTmp[MAX_PATH + 1];
+    char *p;
+    GetCurrentDirectory(MAX_PATH, szCwd);
+    while ((p = strchr(szPath, '/')) && *p)
+	*p = '\\';
+    PathCombine(szTmp, szCwd, szPath);
+    PathCanonicalize(szCwd, szTmp);
+    printf("%s\n", szCwd);
+    return 0;
+}
+
+/*
+ * Local variables:
+ *   mode: c
+ *   c-basic-offset: 4
+ *   fill-column: 78
+ *   indent-tabs-mode: t
+ *   tab-width: 8
+ * End:
+ */
Index: win/nsftest.tcl
===================================================================
diff -u
--- win/nsftest.tcl	(revision 0)
+++ win/nsftest.tcl	(revision c7abd01585e06664f9925485f2c1a5d6a2dbdabb)
@@ -0,0 +1 @@
+lappend auto_path ..; set argv [lassign $argv __src]; source $__src; 
Index: win/pkg.vc
===================================================================
diff -u
--- win/pkg.vc	(revision 0)
+++ win/pkg.vc	(revision c7abd01585e06664f9925485f2c1a5d6a2dbdabb)
@@ -0,0 +1,6 @@
+# remember to change configure.in as well when these change
+# (then re-autoconf)
+
+PACKAGE_MAJOR	= 2
+PACKAGE_MINOR	= 0
+PACKAGE_VERSION	= "2.0b5"
Index: win/rules.vc
===================================================================
diff -u
--- win/rules.vc	(revision 0)
+++ win/rules.vc	(revision c7abd01585e06664f9925485f2c1a5d6a2dbdabb)
@@ -0,0 +1,630 @@
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+#	Microsoft Visual C++ makefile include for decoding the commandline
+#	macros.  This file does not need editing to build Tcl.
+#
+#	This version is modified from the Tcl source version to support
+#	building extensions using nmake.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2003 David Gravereaux.
+# Copyright (c) 2003-2008 Patrick Thoyts
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32		= $(CC)   # built-in default.
+link32		= link
+lib32		= lib
+rc32		= $(RC)   # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR	= C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR	= $(INSTALLDIR:/=\)
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR	= rmdir /S /Q
+ERRNULL  = 2>NUL
+!if ![ver | find "4.0" > nul]
+CPY	= echo y | xcopy /i >NUL
+COPY	= copy >NUL
+!else
+CPY	= xcopy /i /y >NUL
+COPY	= copy /y >NUL
+!endif
+!else # "$(OS)" != "Windows_NT"
+CPY	= xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
+COPY	= copy >_JUNK.OUT # On Win98 NUL does not work here.
+RMDIR	= deltree /Y
+NULL    = \NUL # Used in testing directory existence
+ERRNULL = >NUL # Win9x shell cannot redirect stderr
+!endif
+MKDIR   = mkdir
+
+#------------------------------------------------------------------------------
+# Determine the host and target architectures and compiler version.
+#------------------------------------------------------------------------------
+
+_HASH=^#
+_VC_MANIFEST_EMBED_EXE=
+_VC_MANIFEST_EMBED_DLL=
+VCVER=0
+!if ![echo VCVERSION=_MSC_VER > vercl.x] \
+    && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
+    && ![echo ARCH=IX86 >> vercl.x] \
+    && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
+    && ![echo ARCH=AMD64 >> vercl.x] \
+    && ![echo $(_HASH)endif >> vercl.x] \
+    && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
+!include vercl.i
+!if ![echo VCVER= ^\> vercl.vc] \
+    && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
+!include vercl.vc
+!endif
+!endif
+!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
+!endif
+
+!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
+NATIVE_ARCH=IX86
+!else
+NATIVE_ARCH=AMD64
+!endif
+
+# Since MSVC8 we must deal with manifest resources.
+!if $(VCVERSION) >= 1400
+_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
+_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
+!endif
+
+!ifndef MACHINE
+MACHINE=$(ARCH)
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING	= \"cp1252\"
+!endif
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Ot]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING	= 1
+!else
+!message *** Compiler does not have 'Optimizations'
+OPTIMIZING	= 0
+!endif
+
+OPTIMIZATIONS   =
+
+!if [nmakehlp -c -Ot]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Ot
+!endif
+
+!if [nmakehlp -c -Oi]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Oi
+!endif
+
+!if [nmakehlp -c -Op]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Op
+!endif
+
+!if [nmakehlp -c -fp:strict]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -fp:strict
+!endif
+
+!if [nmakehlp -c -Gs]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -Gs
+!endif
+
+!if [nmakehlp -c -GS]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -GS
+!endif
+
+!if [nmakehlp -c -GL]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -GL
+!endif
+
+DEBUGFLAGS     =
+
+!if [nmakehlp -c -RTC1]
+DEBUGFLAGS     = $(DEBUGFLAGS) -RTC1
+!elseif [nmakehlp -c -GZ]
+DEBUGFLAGS     = $(DEBUGFLAGS) -GZ
+!endif
+
+COMPILERFLAGS  =-W3
+
+# In v13 -GL and -YX are incompatible.
+!if [nmakehlp -c -YX]
+!if ![nmakehlp -c -GL]
+OPTIMIZATIONS  = $(OPTIMIZATIONS) -YX
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+COMPILERFLAGS  = $(COMPILERFLAGS) -QI0f
+!else
+!message *** Compiler does not have 'Pentium 0x0f fix'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+COMPILERFLAGS   = $(COMPILERFLAGS) -QIA64_Bx
+!else
+!message *** Compiler does not have 'B-stepping errata workarounds'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK	= 1
+!else
+!message *** Linker does not have 'Win98 alignment problem'
+ALIGN98_HACK	= 0
+!endif
+!else
+ALIGN98_HACK	= 0
+!endif
+
+LINKERFLAGS     =
+
+!if [nmakehlp -l -ltcg]
+LINKERFLAGS     =-ltcg
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD	= 0
+TCL_THREADS	= 1
+DEBUG		= 0
+SYMBOLS		= 0
+PROFILE		= 0
+PGO		= 0
+MSVCRT		= 0
+LOIMPACT	= 0
+UNCHECKED	= 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD	= 1
+!else
+STATIC_BUILD	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT		= 1
+!else
+MSVCRT		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "nothreads"]
+!message *** Compile explicitly for non-threaded tcl
+TCL_THREADS	= 0
+!else
+TCL_THREADS	= 1
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG		= 1
+!else
+DEBUG		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "pdbs"]
+!message *** Doing pdbs
+SYMBOLS		= 1
+!else
+SYMBOLS		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE		= 1
+!else
+PROFILE		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "pgi"]
+!message *** Doing profile guided optimization instrumentation
+PGO		= 1
+!elseif [nmakehlp -f $(OPTS) "pgo"]
+!message *** Doing profile guided optimization
+PGO		= 2
+!else
+PGO		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT	= 1
+!else
+LOIMPACT	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "unchecked"]
+!message *** Doing unchecked
+UNCHECKED = 1
+!else
+UNCHECKED = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT		= 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+#----------------------------------------
+# Naming convention:
+#   t = full thread support.
+#   s = static library (as opposed to an
+#	import library)
+#   g = linked to the debug enabled C
+#	run-time.
+#   x = special static build when it
+#	links to the dynamic C run-time.
+#----------------------------------------
+SUFX	    = sgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+!else
+BUILDDIRTOP = Release
+!endif
+
+!if "$(MACHINE)" != "IX86"
+BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
+!endif
+!if $(VCVER) > 6
+BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
+!endif
+
+!if !$(DEBUG) || $(UNCHECKED)
+SUFX	    = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_DynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX	    = $(SUFX:s=)
+EXT	    = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT	    = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR	    = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR	    = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR	    = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG	    = 0
+TCL_COMPILE_DEBUG   = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG	    = 1
+!else
+TCL_MEM_DEBUG	    = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG   = 1
+!else
+TCL_COMPILE_DEBUG   = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the checks requested.
+#----------------------------------------------------------
+
+!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
+TCL_NO_DEPRECATED	    = 0
+WARNINGS		    = -W3
+!else
+!if [nmakehlp -f $(CHECKS) "nodep"]
+!message *** Doing nodep check
+TCL_NO_DEPRECATED	    = 1
+!else
+TCL_NO_DEPRECATED	    = 0
+!endif
+!if [nmakehlp -f $(CHECKS) "fullwarn"]
+!message *** Doing full warnings check
+WARNINGS		    = -W4
+!if [nmakehlp -l -warn:3]
+LINKERFLAGS		    = $(LINKERFLAGS) -warn:3
+!endif
+!else
+WARNINGS		    = -W3
+!endif
+!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
+!message *** Doing 64bit portability warnings
+WARNINGS		    = $(WARNINGS) -Wp64
+!endif
+!endif
+
+!if $(PGO) > 1
+!if [nmakehlp -l -ltcg:pgoptimize]
+LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!elseif $(PGO) > 0
+!if [nmakehlp -l -ltcg:pginstrument]
+LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!endif
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES	= -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_THREADS=1 -DUSE_THREAD_ALLOC=1
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES	= $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+!if $(TCL_NO_DEPRECATED)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_NO_DEPRECATED
+!endif
+
+!if !$(DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DNDEBUG
+!if $(OPTIMIZING)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!endif
+!if $(PROFILE)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+
+
+#----------------------------------------------------------
+# Get common info used when building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+# If INSTALLDIR set to tcl root dir then reset to the lib dir.
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+_INSTALLDIR=$(_INSTALLDIR)\lib
+!endif
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\..\include\tcl.h")
+TCLINSTALL	= 1
+_TCLDIR		= $(_INSTALLDIR)\..
+_TCL_H          = $(_INSTALLDIR)\..\include\tcl.h
+TCLDIR          = $(_INSTALLDIR)\..
+!else
+MSG=^
+Failed to find tcl.h.  Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR	= $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL	= 1
+_TCL_H          = $(_TCLDIR)\include\tcl.h
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL	= 0
+_TCL_H          = $(_TCLDIR)\generic\tcl.h
+!else
+MSG =^
+Failed to find tcl.h.  The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if [echo REM = This file is generated from rules.vc > versions.vc]
+!endif
+!if exist("$(_TCL_H)")
+!if [echo TCL_DOTVERSION = \>> versions.vc] \
+   && [nmakehlp -V "$(_TCL_H)" TCL_VERSION >> versions.vc]
+!endif
+!endif
+!include versions.vc
+TCL_VERSION	= $(TCL_DOTVERSION:.=)
+
+!if $(TCLINSTALL)
+TCLSH		= "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH           = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB	= "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\lib
+COFFBASE	= \must\have\tcl\sources\to\build\this\target
+TCLTOOLSDIR	= \must\have\tcl\sources\to\build\this\target
+TCL_INCLUDES    = -I"$(_TCLDIR)\include"
+!else
+TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\library
+COFFBASE	= "$(_TCLDIR)\win\coffbase.txt"
+TCLTOOLSDIR	= $(_TCLDIR)\tools
+TCL_INCLUDES	= -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Optionally check for Tk info for building extensions.
+#----------------------------------------------------------
+
+!ifdef PROJECT_REQUIRES_TK
+!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk"
+
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\..\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_INSTALLDIR)\..
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!elseif exist("$(_TCLDIR)\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_TCLDIR)
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL      = 1
+_TK_H          = $(_TKDIR)\include\tk.h
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL      = 0
+_TK_H          = $(_TKDIR)\generic\tk.h
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if defined(TKDIR)
+TK_DOTVERSION = 8.4
+!if exist("$(_TK_H)")
+!if [echo TK_DOTVERSION = \>> versions.vc] \
+   && [nmakehlp -V "$(_TK_H)" TK_VERSION >> versions.vc]
+!endif
+!endif
+!include versions.vc
+TK_VERSION = $(TK_DOTVERSION:.=)
+
+!if $(TKINSTALL)
+WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+!if !exist($(WISH)) && $(TCL_THREADS)
+WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)t$(SUFX).exe"
+!endif
+TKSTUBLIB	= "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\include"
+!else
+WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(WISH)) && $(TCL_THREADS)
+WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TKSTUBLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+!endif
+
+!endif
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Setup the fully qualified OUT_DIR path as OUT_DIR_PATH
+#----------------------------------------------------------
+!if [echo OUT_DIR_PATH = \>> versions.vc] \
+    && [nmakehlp -Q "$(OUT_DIR)" >> versions.vc]
+!endif
+!include versions.vc
+
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
+!message *** Host architecture is $(NATIVE_ARCH)
+!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
+!message *** Link options '$(LINKERFLAGS)'
+
+!endif