With the recent release of a win32 version of AOLserver, it is now possible to run the OpenACS on Windows2000 and Windows98. This document explains the steps necessary to get the OpenACS installed and running on your machine.

We do not recommend running a production server on Windows98. But the platform is more than sufficient for working the problem sets and for getting a feel for the OpenACS.

You'll need to use the ArsDigita binary distribution of AOLserver for the Win32 platform, which contains patches for several problems we have come across in the default AOLserver binary distribution. See the ArsDigita AOLserver 3 distribution page for details.

You can download the binary distribution from the ArsDigita download page under "ArsDigita AOLserver 3 Binary Distribution for Win32." Please read the release notes in the distribution for configuration notes specific to the version you are downloading.

It is helpful if you have Oracle interMedia Text for full-text searches. We're also trying to make our system work with the PLS System, available free from http://www.pls.com.

Although the zsh shell is the only command-line tool required to install the OpenACS, if you are a UNIX person used to typing ls instead of dir you'll get along much better with the Cygwin toolkit from RedHat (available at http://sourceware.cygnus.com/cygwin). This is a development library and set of tools that gives you a very UNIX-like environment under Windows. In particular, it includes bash, gzip and tar, which you can use to perform the OpenACS installation instead of WinZip and zsh.

When you install Oracle, a good rule of thumb is "every default setting is wrong." We will not discuss Oracle configuration here except to mention that the OpenACS requires Oracle's NLS_DATE_FORMAT parameter be set to 'YYYY-MM-DD'. Fixing this depends on whether Oracle Administration Assistant for Windows NT (yes, that's Windows

If it runs on your machine, proceed as follows:

Otherwise you will need to perform a little registry surgery as follows:

For more information on Oracle configuration look at http://photo.net/wtr/oracle-tips or search the OpenACS forums. One other note: the "nuke a user" admin page and Intermedia won't run unless you set open_cursors = 500 for your database.

Extract the ArsDigita AOLserver distribution onto the C: drive into the default aol30 directory. You can install it on any drive, but it will make your life easier if you keep the AOLserver binary and your OpenACS instance on the same drive. For the rest of these instructions, we'll assume that you used drive C:.

We recommend rooting webserver content in c:\web. Since most servers these days are expected to run multiple services from multiple IP addresses, each server gets a subdirectory from c:\web. For example, http://scorecard.org would be rooted at c:\web\scorecard on one of our machines and if http://jobdirect.com were on the same box then it would be at c:\web\jobdirect.

For the sake of argument, we're going to assume that your service is called "yourdomain", is going to be at http://yourdomain.com and is rooted at c:\web\yourdomain in the Windows 2000 file system. Note that you'll find our definitions files starting out with "yourdomain.com".

You'll now find that c:\web\yourdomain\www contains the document root and c:\web\yourdomain\tcl contains Tcl scripts that are loaded when the AOLserver starts up.

The entire server will behave in an unhappy manner if it connects to Oracle and finds that, for example, the users table does not exist. Thus you need to connect to Oracle as whatever user the AOLserver will connect as, and feed Oracle the table definitions.

You will need two configuration files. The first is a Tcl file with configuration information for AOLserver. This should be called yourdomain and should be located in c:\aolserve3_0. The second is an .ini file that configures the OpenACS and is discussed below. Note that pathnames in yourdomain must use forward slashes rather than the Windows back slashes. This is also true for the .ini file.

The following items must be defined in yourdomain:

You can use our template file as a starting point (you'll need to save this file with a rather than .txt extension).

If you want a system that works, go to c:\web\yourdomain\parameters and copy ad.ini to yourdomain.ini (or any other name different from ad.ini). You don't actually have to delete ad.ini.

Each section of yourdomain.ini has a hardcoded "yourservername" in the name (e.g. [ns/server/yourservername/acs]). This means that the OpenACS will ignore your configuration settings unless your AOLserver name happens to be "yourservername". Therefore you must go through yourdomain.ini and change "yourservername" to whatever you're calling this particular AOLserver (look at the server name in the nsd file for a reference).

Unless you want pages that advertise a community called "Yourdomain Network" owned by "webmaster@yourdomain.com", you'll probably want to edit the text of yourdomain.ini to change system-wide parameters. If you want to see how some of these are used, a good place to look is c:\web\yourdomain\tcl\ad-defs. The Tcl function, ad_parameter, is used to grab parameter values from the .ini file.

Now you're ready to start things up. Before installing as a Windows service, you might want to test the setup for configuration errors. Open up a console window and go to c:\aol30. Then run

bin\nsd -ft yourdomain.tcl

This will print all the AOLserver messages to the console so you can see them.

Try to connect to your new server with a web browser. If you see the message "Error in serving group pages", you probably forgot to copy the ad.ini file in c:\web\yourdomain\parameters If everything seems ok, you can kill the server with Control-c and then issue the following command to install as a Windows service:

bin\nsd -I -s yourdomain -t yourdomain.tcl

You can now configure error recovery and other Windows aspects of the service from the Services control panel. If you make further changes to yourdomain or yourdomain.ini you should stop and start the service from the Services control panel.

Now, you need to protect the proper administration directories of the OpenACS. You decide the policy although we recommend requiring the admin directories be accessible only via an SSL connection. Here are the directories to consider protecting:

OpenACS will define two users: system and anonymous. It will also define a user group of system administrators. You'll want to add yourself as a user (at /register/ ) and then add yourself as as member of the site-wide administration group. Start by logging out as yourself and logging in as the system user (email of "system"). Change the system user's password. Visit the https://yourservername.com/admin/ug/ directory and add your personal user as a site-wide administrator. Now you're bootstrapped!

If you do not know what the system user's password is connect to Oracle using SQL Plus and run the following query:

select password from users where last_name = 'system';

The OpenACS ships with a user named "anonymous" (email "anonymous") to serve as a content owner. If you're operating a restricted-access site, make sure to change the anonymous user's password. In recent versions of the OpenACS you cannot log into "anonymous" because the account does not have a valid user state. Log in as a sysadmin and change the anonymous user's password from https://yourservername/admin/users. You should read the documentation for user registration and access control and decide what the appropriate user state is for anonymous on your site.

A few pointers:

Run the acceptance tests in /doc/acceptance-test

You can run multiple instances of the OpenACS on a physical machine but they must each be set up as a separate Windows service. Each instance of the OpenACS must have its own:

Suppose you wish to run two services: lintcollectors.com and iguanasdirect.com. You would need the following:

For each of these tablespaces/users you would load the OpenACS data model as described above. Then in c:\aolserver3_0 create files for each service, i.e. lintcollectors and iguanasdirect. These files would point to their respective pageroots, c:\web\lintcollectors\www and c:\web\iguanasdirect\www; their respective auxconfigdirs, c:\web\lintcollectors\parameters and c:\web\iguanasdirect\parameters; etc. In the respective auxconfigdirs would be the files lintcollectors.ini and iguanasdirect.ini.

Now open a console window and go to c:\aol30. You'll start up the two services as follows:

bin\nsd -I -s lintcollectors -t lintcollectors.tcl
bin\nsd -I -s iguanasdirect -t iguanasdirect.tcl

In the services control panel you should see two services: AOLserver-lintcollectors and AOLserver-iguanasdirect.