| Prev | Chapter�3.�Complete Installation | Next |
|---|
- (Debian users: we do not recommend installing Debian packages for - Aolserver or Postgres. Several people have - reported problems while trying to install using apt-get - instead of from source. If you have the time to debug these - and submit what you did, that's great, but if not, you - should stick to installing from source. -
Retrieve TCL 8.4 (or higher).�Download and install TCL 8.4
If you have not installed TCL already, download the latest TCL version from Sourceforge
Remember that you have to be root if you want to follow these instructions. On Mac OS X type sudo su - to become root.
Alternatively use curl -L -O instead of wget (especially on Mac OS X.
[root root]# cd /usr/local/src
[root src]# wget http://heanet.dl.sourceforge.net/sourceforge/tcl/tcl8.4.5-src.tar.gz
[root src]# tar xfz tcl8.4.5-src.tar.gz
[root src]# cd tcl8.4.5/unix
@@ -20,14 +13,13 @@
tar xfz tcl8.4.5-src.tar.gz
cd tcl8.4.5/unix
./configure --enable-threads
-make install
-
+make install
Retrieve AOLserver.�Download the aolserver from CVS.
[root root]# cd /usr/local/src
-[root src]# mkdir aolserver
-[root src]# cd aolserver
+[root src]# mkdir aolserver40r2
+[root src]# cd aolserver40r2
+[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver login
[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co -r aolserver_v40_r2 aolserver
[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nscache
-[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nsrewrite
[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nspostgres
[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nssha1
[root aolserver]# cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nsoracle
@@ -36,52 +28,46 @@
[root aolserver]# tar xvfz tDOM-0.7.8.tar.gz
[root root]#
cd /usr/local/src
-mkdir aolserver
-cd aolserver
+mkdir aolserver40r2
+cd aolserver40r2
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co -r aolserver_v40_r2 aolserver
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nscache
-cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nsrewrite
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nspostgres
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nssha1
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nsoracle
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/aolserver co nsxml
wget http://www.tdom.org/tDOM-0.7.8.tar.gz
-tar xvfz tDOM-0.7.8.tar.gzConfigure, compile and install AOLserver.�
[root aolserver]# cd aolserver -[root aolserver]# cd aolserver -[root aolserver]# ./configure --with-tcl=/usr/local/lib/ -[root aolserver]# make install
Configure, compile and install the modules.� -
[root /usr/local/src/aolserver/aolserver]# cd ../nscache -[root /usr/local/src/aolserver/nscache]# make install
[root /usr/local/src/aolserver/nscache]# cd ../nsrewrite -[root /usr/local/src/aolserver/nsrewrite]# make install
Install nsoracle (if you want to use Oracle)
[root /usr/local/src/aolserver/nscache]# cd ../nsoracle -[root /usr/local/src/aolserver/nsrewrite]# make install
Steps so far
cd /usr/local/src/aolserver/
+tar xvfz tDOM-0.7.8.tar.gzConfigure, compile and install AOLserver.�Many people need to run more than one version of AOLserver in parallel. This section accomodates future upgrades by installing AOLserver 4 in /usr/local/aolserver40r2.
[root aolserver]# cd /usr/local/src/aolserver40r2/aolserver
+[root aolserver]# ./configure --prefix=/usr/local/aolserver40r2 --with-tcl=/usr/local/lib/
+[root aolserver]# make install
+ cd /usr/local/src/aolserver40r2/aolserver
./configure --with-tcl=/usr/local/lib/
make install
-cd ../nscache
-make install
-cd ../nsrewrite
-make install
-cd ../nsoracle
-make installInstall nspostgres (if you want to use Postgres)
[root nsrewrite]# cd ../nspostgres -[root nspostgres]# sudo make install POSTGRES=/usr/local/pgsql ACS=1 INST=/usr/local/aolserver
If you run into problems with libpq.a do the following (and repeat the step above)
[root nspostgres]# sudo ranlib /usr/local/pgsql/lib/libpq.a
If you run into problems with the linker, edit the Makefile. Add -lnsdb to the MODLIBS var.
MODLIBS = -L$(PGLIB) -lpq -lnsdb[root nsrewrite]# cd ../nssha1 +ln -s /usr/local/aolserver40r2 /usr/local/aolserver
If this is the only version of AOLserver in use, or is the default version, create a symlink. If not, then be sure to use /usr/local/aolserver40r2 instead of /usr/local/aolserver in future steps.
[root aolserver]# ln -s /usr/local/aolserver40r2 /usr/local/aolserver
Configure, compile and install the modules.� +
[root aolserver]# cd /usr/local/src/aolserver40r2/nscache +[root nscache]# make install
Install nsoracle (if you want to use Oracle)
[root nscache]# cd ../nsoracle +[root nsoracle]# make install
Install nspostgres (if you want to use Postgres)
[root nsrewrite]# cd ../nspostgres +[root nspostgres]# make install POSTGRES=LSB ACS=1 INST=/usr/local/aolserver40r2
If you get errors like:
nspostgres.c: In function `Ns_PgTableList': +nspostgres.c:679: warning: passing arg 3 of `Tcl_DStringAppend' as signed due to prototype
then PostGreSQL is probably not in the standard location. The location of PostGreSQL is very dependent on which method was used to install it. To correct the problem, replace LSB with the path to the path to your PostGreSQL installation. Often this is /usr/local/pgsql.
If you run into problems with libpq.a do the following (and repeat the step above)
[root nspostgres]# ranlib /usr/local/pgsql/lib/libpq.a
If you run into problems with the linker, edit the Makefile. Add -lnsdb to the MODLIBS var.
MODLIBS = -L$(PGLIB) -lpq -lnsdb[root nsrewrite]# cd ../nssha1 [root nssha1]# make
If the make fails you will have to edit nssha1.c. Comment out the following 2 lines (lines 139-140):
// typedef unsigned int u_int32_t; // typedef unsigned char u_int8_t;
Now install nssha1:
[root nssha1]# make install
[root nssha1]# cd ../tDOM-0.7.8/unix
Edit the CONFIG file. Uncomment the instructions meant for AOLserver 4, but edit it to look like this:
../configure --enable-threads --disable-tdomalloc - --prefix=/usr/local/aolserver --with-tcl=/usr/local/lib
Now you can compile and configure tDOM
[root unix]# sh CONFIG + --prefix=/usr/local/aolserver40r2 --with-tcl=/usr/local/lib
Now you can compile and configure tDOM
[root unix]# sh CONFIG [root unix]# make install
Add a database-specific wrapper script.�This script sets database environment variables before starting AOLserver; this allows the AOLserver instance can communicate with the database. There is one script each for Oracle and PostgreSQL. They don't conflict, so if you plan - to use both databases, install both.
Oracle
[root aolserver]# cd /usr/local/aolserver/bin -[root bin]# cp /tmp/openacs-5.0.2/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle + to use both databases, install both.
Oracle
[root aolserver]# cd /usr/local/aolserver40r2/bin +[root bin]# cp /tmp/openacs-5.0.4/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle [root bin]# chmod 750 nsd-oracle [root bin]# -cd /usr/local/aolserver/bin -cp /tmp/openacs-5.0.2/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle -chmod 750 nsd-oraclePostgreSQL
[root aolserver]# cd /usr/local/aolserver/bin -[root bin]# cp /tmp/openacs-5.0.2/packages/acs-core-docs/www/files/nsd-postgres.txt ./nsd-postgres +cd /usr/local/aolserver40r2/bin +cp /tmp/openacs-5.0.4/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle +chmod 750 nsd-oraclePostgreSQL
[root aolserver]# cd /usr/local/aolserver40r2/bin +[root bin]# cp /tmp/openacs-5.0.4/packages/acs-core-docs/www/files/nsd-postgres.txt ./nsd-postgres [root bin]# chmod 755 nsd-postgres [root bin]# -cd /usr/local/aolserver/bin -cp /tmp/openacs-5.0.2/packages/acs-core-docs/www/files/nsd-postgres.txt ./nsd-postgres -chmod 755 nsd-postgres
Change startup script (optional).�If you want to run AOLserver on a port below 1024 (normally, for a webserver you will use 80), you will have to change the /var/lib/aolserver/service0/etc/daemontools/run script according to the documentation found there (namely: Add the -b yourip:yourport switch)
Change startup script (optional).�If you want to run AOLserver on a port below 1024 (normally, for a webserver you will use 80), you will have to change the /var/lib/aolserver/service0/etc/daemontools/run script according to the documentation found there (namely: Add the -b yourip:yourport switch)