A session is defined as a series of clicks in which no two clicks are separated by more than some constant. This constant is the parameter SessionTimeout. Using the expiration time on the signatures of the signed cookies, we can verify when the cookie was issued and determine if two requests are part of the same session. It is important to note that the expiration time set in the cookie protocol is not trusted. Only the time inserted by the signed cookie mechanism is trusted.

Two levels of access can be granted: insecure and secure. This grant lasts for the remainder of the particular session. Secure authentication tokens are only issued over secured connections.

One consequence of this security design is that secure tokens are not automatically issued to users who authenticate themselves over insecure connections. This means that users will need to reauthenticate themselves over SSL when performing some action that requires secure authentication.

Although this makes the site less user friendly, this design significantly increases the security of the system because this ensures that the authentication tokens presented to a secure section of the web site were not sniffed. The system is not entirely secure, since the actual authentication password can be sniffed from the system, after which the sniffer can apply for a secure authentication token. However, the basic architecture here lays the foundation for a secure system and can be easily adapted to a more secure authentication system by forcing all logins to occur over HTTPS.

The authentication system issues up to four signed cookies (see below), with each cookie serving a different purpose. These cookies are:

The Tcl function (sec_handler) is called by the request processor to authenticate the user. It first checks the ad_session_id cookie. If there is no valid session in progress, a new session is created with sec_setup_session. If the user has permanent login cookies (ad_user_login and ad_user_login_secure), then they are looked at to determine what user the session should be authorized as. Which cookie is examined is determined by whether or not the request is on a secure connection. If neither cookie is present, then a session is created without any authentication. If the ad_session_id cookie is valid, the user_id and session_id are pulled from it and put into ad_conn.

Secure connections are authenticated slightly differently. The function ad_secure_conn_p is used to determine whether or not the URL being accessed is requires a secure login. The function simply checks if the location begins with "https". (This is safe because the location is set during the server initialization.)

If secure authentication is required, the ad_secure_token cookie is checked to make sure its data matches the data stored in ad_session_id. This is true for all pages except those that are part of the login process. On these pages, the user can not yet have received the appropriate ad_secure_token cookie, so no check against it is performed. The set of pages that skip that processing are determined by determined by ad_login_page. Since the ad_secure_token cookie is a session cookie, it is deleted by the browser when the browser exits. Since an attacker could conceivably store the secure cookie in a replay attack (since expiration date is not validated), the data in the secure cookie is never used to set any data in ad_conn; user_id and session_id is set from the ad_session_id cookie.

It is important to note that the integrity of secure authentication rests on the two Tcl function ad_secure_conn_p and ad_login_page. If ad_secure_conn_p is false, secure authentication is not required. If ad_login_page is false, secure authentication is not required.

The Tcl function ad_user_login does two things. First it performs the appropriate manipulation of the permanent login cookies, and then it updates the current session to reflect the new user_id. The manipulation of the permanent login cookies is based on 3 factors:

Both the secure and insecure permanent login cookie can have one of three actions taken on it:

The current state of the permanent login cookies is not taken into account when determining the appropriate action.

ad_user_login callssec_setup_session which actually calls sec_generate_session_id_cookie to generate the new cookie with refer to the appropriate user_id. If the connection is secure the ad_secure_token cookie is generated by a call to sec_generate_secure_token_cookie. This function is only called from sec_setup_session. Only sec_handler and sec_setup_session call sec_generate_session_id_cookie.

ad_user_logout logs the user out by deleting all 4 cookies that are used by the authentication system.

The creation and setup of sessions is handled in sec_setup_session, which is called either to create a new session from sec_handler or from ad_user_login when there is a change in authorization level. The session management code must do two things: ensure that session-level data does not float between users, and update the users table which has columns for n_sessions, last_visit, and second_to_last_visit.

If there is no session already setup on this hit, a new session is created. This happens when sec_setup_session is called from sec_handler. If the login is from a user to another user, a new session is created, otherwise, the current session is continued, simply with a higher authorization state. This allows for data associated with a session to be carried over when a user logs in.

The users table is updated by sec_update_user_session_info which is called when an existing session is assigned a nonzero user_id, or when a session is created with a nonzero user_id.

ad_user_login assumes a password check has already been performed (this will change in the future). The actual check is done by ad_check_password. The database stores a salt and a hash of the password concatenated with the salt. Updating the password (ad_change_password) simply requires getting a new salt (ns_time) concatenating and rehashing. Both the salt and the hashed password field are updated.

A session is labeled by a session_id sequence. Creating a session merely requires incrementing the session_id sequence. We do two things to improve the performance of this process. First, sequence values are precomputed and cached in the Oracle SGA. In addition, sequence values are incremented by 100 with each call to nextval. These sequences values are cached on a per-thread basis. The cost of allocating a new session thus becomes the cost of executing an incr Tcl command per thread. This minimizes lock contention for the session ID sequence and also minimizes the number of DB requests, since each thread can allocate 100 sessions before requiring another DB hit. This cache works by keeping two counters: tcl_max_value and tcl_current_sequence_id. When tcl_current_sequence_id is greater than tcl_max_value a new value is requested from the db and tcl_max_value is incremented by 100. This is done on a per-thread basis so that no locking is required.

In addition, two procedures are dynamically generated at startup in security-init.tcl. These two procedures use ad_parameter to obtain the constant value of a given parameter; these values are used to dynamically generate a procedure that returns a constant. This approach avoids (relatively) expensive calls to ad_parameter in sec_handler. The impact of this approach is that these parameters cannot be dynamically changed at run time and require a server restart.

Session properties are stored in a single table that maps session IDs to named session properties and values. This table is periodically purged. For maximum performance, the table is created with nologging turned on and new extents are allocated in 50MB increments to reduce fragmentation. This table is swept periodically by sec_sweep_session which removes sessions whose first hit was more than SessionLifetime seconds (1 week by default) ago. Session properties are removed through that same process with cascading delete.

Session properties can be set as secure. In this case, ad_set_client_property will fail if the connection is not secure. ad_get_client_property will behave as if the property had not been set if the property was not set securely.

Signed cookies are implemented using the generic secure digital signature mechanism. This mechanism guarantees that the user can not tamper with (or construct a value of his choice) without detection. In addition, it provides the optional facility of timing out the signature so it is valid for only a certain period of time. This works by simply including an expiration time as part of the value that is signed.

The signature produced by ad_sign is the Tcl list of token_id,expire_time,hash, where hash = SHA1(value,token_id,expire_time,secret_token). The secret_token is a forty character randomly generated string that is never sent to any user agent. The scheme consists of one table:

create table secret_tokens (
    token_id                    integer
                                constraint secret_tokens_token_id_pk primary key,
    token                       char(40),
    token_timestamp             sysdate
);

ad_verify_signature takes a value and a signature and verifies that the signature was generated using that value. It works simply by taking the token_id and expire_time from the signature, and regenerating the hash using the supplied value and the secret_token corresponding to the token_id. This regenerated hash is compared to the hash extracted from the supplied signature. The expire_time is also verified to be greater than the current time. An expire_time of 0 is also allowed, as it indicates no time out on the signature.

Signed cookies include in their RFC2109 VALUE field a Tcl list of the value and the signature. In addition to the expiration of the digital signature, RFC 2109 specifies an optional max age that is returned to the client. For most cookies, this max age matches the expiration date of the cookie's signature. The standard specifies that when the max age is not included, the cookie should be "discarded when the user agent exits." Because we can not trust the client to do this, we must specify a timeout for the signature. The SessionLifetime parameter is used for this purpose, as it represents the maximum possible lifetime of a single session.

RFC 2109 specifies this optional "secure" parameter which mandates that the user-agent use "secure means" to contact the server when transmitting the cookie. If a secure cookie is returned to the client over https, then the cookie will never be transmitted over insecure means.

External SSL mechanisms (firewall, dedicated hardware, etc.) can be used by creating two pools of AOLservers. In one pool the servers should be configured with the location parameter of nssock module set to "https://yourservername". The servers in the other pool are configured as normal. The external SSL agent should direct SSL queries to the pool of secure servers, and it should direct non-SSL queries to the insecure servers.

The pseudorandom number generator depends primarily on ns_rand, but is also seeded with ns_time and the number of page requests served since the server was started. The PRNG takes the SHA1(seed,ns_rand,ns_time,requests,clicks), and saves the first 40 bits as the seed for the next call to the PRNG in a thread-persistent global variable. The remaining 120 bits are rehashed to produce 160 bits of output.

ad_user_login user_id Logs the user in as user user_id. Optional forever flag determines whether or not permanent cookies are issued.

ad_user_logout Logs the user out.

ad_check_password user_idpassword returns 0 or 1.

ad_change_password user_idnew password

ad_sign value Returns the digital signature of this value. Optional parameters allow for the specification of the secret used, the token_id used and the max_age for the signature. ad_verify_signature valuesignature Returns 1 or 0 indicating whether or not the signature matches the value specified. The secret parameter allows for specification of a different secret token to be used.

ad_set_signed_cookie namedata Sets a signed cookie name with value data.

ad_get_signed_cookie name Gets the signed cookie name. It raises an error if the cookie has been tampered with, or if its expiration time has passed.

ad_set_client_property modulenamedata Sets a session property with name to value data for the module module. The optional secure flag specifies the property should only be set if the client is authorized for secure access (ad_secure_conn_p is true). There is also an optional session_id flag to access data from sessions other than the current one.

ad_get_client_property modulenamedata Gets a session property with name to for the module module. The optional secure flag specifies the property should only be retrieved if the client is authorized for secure access (ad_secure_conn_p is true). There is also an optional session_id flag to access data from sessions other than the current one.

SessionTimeout the maximum time in seconds (default 1200) between requests that are part of the same session

SessionRenew the time in seconds (default 300) between reissue of the session cookie. The minimum time that can pass after a session cookie is issued and before it is rejected is (SessionTimeout - SessionRenew). This parameter is used so that only one session_id cookie is set on a single page even if there are multiple images that are being downloaded.

SessionLifetime the maximum possible lifetime of a session in seconds (default 604800 = 7 days)

NumberOfCachedSecretTokens the number of secret tokens to cache. (default 100)

The pseudorandom number generator used in the OpenACS is cryptographically weak, and depends primarily on the randomness of the ns_rand function for its randomness. The implementation of the PRNG could be substantially improved.

Add a password argument. It is non-optimal to make the default behavior to assume that the password was provided.

The secret tokens pool is currently static. Ideally, this pool should be changed on a random but regular basis, and the number of secret_tokens increased as the number of users come to the web site.

Since the security of the entire system depends on the secret tokens pool, access to the secret tokens table should be restricted and accessible via a strict PL/SQL API. This can be done by revoking standard SQL permissions on the table for the AOLserver user and giving those permissions to a PL/SQL package.

Deferring session to creation until the second hit from a browser seems to be a good way of preventing a lot of overhead processing for robots. If we do this, send cookie on first hit to test if cookies are accepted, then actually allocate on second hit. To preserve a record of the first hit of the session, just include any info about that first hit in the probe cookie sent. Look at how usca_p (user session cookie attempted) is used in OpenACS 3.x ecommerce.

Currently there are only session properties. Because sessions have a maximum life, properties have a maximum life. It would be nice to expand the interface to allow for more persistent properties. In the past, there was a sec_browser_properties table that held permanent properties about each unique visitor (for logged-in users, these are just user properties). This was unscalable because there was no way to delete these properties, and the table tended to grow to millions of rows. It would be nice to view browser and session properties as two types of client properties, but with different deletion patterns (there are other differences as well, browser properties can be shared between concurrent sessions). The applications should have control over the deletion patterns, but should not be able to ignore the amount of data stored.

It would be nice to keep some info about sessions: first hit, last hit, and URLs visited come to mind. Both logging and API for accessing this info would be nice. WimpyPoint is an application that already wants to use this information to show how long the current presentation has been viewed. The right way may be to put the session_id into the access log and use log analyzers (leaving it in server memory for applications to access). Putting it into the database at all is probably too big a hammer. Certainly putting it into the database on every hit is too big a hammer.

Two trends drive the requirement for removing cookie dependence. WAP browsers that do not have cookies, and public perceptions of cookies as an invasion of privacy. The rely on the cookies mechanism in HTTP to distinguish one request from the next, and we trust it to force requests from the same client to carry the same cookie headers. The same thing can be accomplished by personalizing the URLs sent back to each browser. If we can store an identifier in the URL and get it back on the next hit, the sessions system would continue to work.

Problems that arise:

Both of these problems can be mitigated by doing detection of cookie support (see the section on robot detection). To help deal with the first problem, One could also make the restriction that secure sessions are only allowed over cookied HTTP.